Gdynia Container Terminal SA, located at the Bulgarian Wharf in Gdynia, Poland, has issued a tender for a new container crane with the following specification:
– Gantry span 20m (rail profile A100)
– Rated load under spreader Q = 60 [tonnes] for twin lift operation, and 41 tonnes for single lift operation
– Spreader capable to handle 20’/30’/40’/45’/2 x 20′
– For twin lift spreader operation, there shall be centre spreaded capability, telescopic type with corner flippers
– Lift above top of seaside rail = 35m to the lowest point of twist lock
– Lift below top of seaside rail = 15m
– Outreach from CL of seaside rail = 52m to service limit, 54m to emergency end stop limit. (to work 18 wide container vessels)
– Crane powered by electricity from the power cable reel system (15 KV±10%, 3 phase, 50Hz±2%,)
– Wheel loads, 40 tonnes per wheel +/-10% for seaside and 32 tonnes per wheel +/-10% for landside with wheel spacing from 1,20m to 1,50m
– Equipped with personnel lift for 3 persons plus tools (?400 kg)
– Warning sensors which stop the gantry unit in front of an obstacle (including obstacles on gantry wheels level)
– Cabin equipped in wipers and air conditioning
– Stationary heating
– Equipped with devices for reactive power compensation
– Spreader levelling control (trim/list/skew system)
– Working conditions with the wind of: 8 BS
– Computer software, driver, any visualisation programs translated into Polish,
– All electrical, hydraulic, mechanical systems, devices must be adapted to the climatic conditions prevailing at the Purchaser’s location,
– Operating rated speeds:
Gantry travel speed (45m/min)
Trolley speed (150 m/min)
Hoisting/lowering speed with rated load (60m/min) and with empty spreader (120m/min)
For further information:
Gdynia Container Terminal SA
ul. Energetyków 5
Contact point(s): Leszek Czartowski, ?ukasz Andrzejewski
PL-81-184 Gdynia
POLAND
Telephone: +48 587855337
E-mail: l.andrzejewski@gct.pl