The works under Parcel 5 of the WBDD project include dredging to – 7.5 m of a 3 km access channel and several access channel ramifications as well as several berth pockets. The specific aim of the Parcel 5 dredging works is to allow early access for heavy equipment and modules to the so called Material Offloading Facilities (MOF’s) on Curtis Island as well as to allow an early start of the LNG jetty construction. A total volume of about 6 million m3 will be dredged, of which about 4 million m3 will be disposed of in strictly defined disposal areas 45 km offshore. The remainder will be pumped ashore to create a provisional new port area in the Port of Gladstone. The actual dredging works will start on 2nd June 2011 and have a contractual execution period of 40 weeks. Heavy-duty dredging equipment will be mobilized to complete this important dredging assignment. Two backhoe dredgers,, one backactor and a spread of splitbarges will start the works in June. As from August 2011 they will be joined by a seagoing cutter dredger to perform the planned reclamation works. The works represent the first stage of the Western Basin Dredging Project (WBDD) that will allow the construction of all planned LNG facilities in Gladstone. Within the largest LNG scheme in Australia coal seam gas (coal bed methane) produced in the Surat and Bowen basins in eastern Queensland will be piped 435 km to several gas liquefaction plants on Curtis Island in Gladstone for conversion into LNG. The proponents for these facilities are Queensland CLNG (BG Group), and Gladstone LNG (Santos, Petronas and partners). The entire project is subdivided into 7 independent Parcels with a total budget of approx. AUD 1,300 million. For the overall project an environmental impact statement (EIS) has been approved already. Only a few weeks ago, Dredging International (Australia) Pty Ltd completed the Gladstone early works dredging and Fisherman’s reclamation works, which were the prelude to this important new contract.