The LHM 800 has a lifting capacity of up to 308 tons and a boom range of up to 64 metres. “We are very proud to be the first on the market to put an LHM 800 mobile port crane into operation. We are using the crane at both our container and RoRo Terminals for loading heavy cargo. Given the increasing size and greater weight of industrial plant components, we are optimally positioned for the future,” says Alexei Shukletsov, Managing Director of the Port of Bronka. Built within eight months, the LHM 800 in heavy load configuration was delivered completely assembled to the Port of Bronka by the freighter, MV “Papenburg”. The cargo handling operation currently has 4 Liebherr STS P167 L (WS) container gantry cranes and 10 RTG cranes built by Konecranes of Finland. The cranes have a stacking height of one-over-five standard containers, can reach over a stack width of six containers plus discharge and load rail tracks and have a lifting capacity of 50 tons beneath the spreader. The high-performance container gantry cranes with a boom reach of 51 metres are capable of discharging or loading 18 adjacent containers on deck. In twin-lift operation they each have a lifting capacity of 65 tons. This equipment is complemented during the first stage by 25 Terberg YT 222 terminal tractors with a capacity of up to 36 tons, 25 Novatech roll-trailers, 2 empty container stackers, 2 reach stackers for use on rail tracks and for the RoRo Terminal, and a Konecranes SMV Loader with a lifting capacity of 33 tons. Bronka’s intermodal handling facilities are therefore optimally positioned for handling state-of-the-art post-Panamax vessels.